Introduction  

1. Greet patient and introduce yourself 
2. Wash hands ✋ 
3. Put gloves and other PPE on ✋ 
4. Briefly explain the procedure in a patient friendly manner 
5. Explain the patient that a chaperone will be present throughout, and why 
6. Get patient consent ✅ 
7. Check is the patient has any relevant allergies 
8. Ensure the patient is not in any pain 
9. Leave the room while the patient removes their underwear and return when they are on the examination couch, covered by a disposable sheet 

Equipment 

 Disposable gloves ✋ 

  Apron 

  Urine bowl 

  Catheter bag 

  Catheter pack 

  Male urinary catheter 

  Lidocaine 1% 

  0.9% sodium chloride (10mls) 

  Sterile water filled syringe 10ml 💧

  Clean procedure tray 

  Clinical waste bin 🗑

Preparation 

1. Place equipment on the clean procedure tray 
2. Pour the 0.9% sodium chloride on the cotton balls from the catheter pack 
3. Ask the patient to lie in a supine position 
4. Wash hands ✋ 
5. Put on gloves ✋ 
6. Ask chaperone to lift the sheet, exposing the patient’s genitals 
7. Position a sterile absorbent pad beneath the genitals 

Cleaning  

1. Using your non-dominant hand, part the patient’s labia 
2. Clean the genital region using the soaked cotton ball, wiping in a downwards movement once with each cotton ball ⬇ 
3. Dispose of the cotton balls and your gloves appropriately ✋ 
4. Put on clean gloves ✋ 
5. Place the sterile drape over the patient, with the genitals visible through the hole 
6. Place the urine bowl on the sterile drape, below the genitals 

Anaesthesia 

1. Tell the patient you are ready to apply the anaesthetic gel which may sting at first 
2. Use your non-dominant hand to part the labia once again ✋ 
3. Position the anaesthetic gel syringe in the urethral meatus  
4. Slowly release the 5ml contents of the syringe into the urethra 
5. Wait for between 3 and 5 minutes for the anaesthetic to take effect ⏱ 

Insertion 

1. Remove tear-away section of the catheter wrapper
2. Use your non-dominant hand to part the labia again ✋ 
3. Tell the patient you are ready to insert the catheter 
4. Using your dominant hand, insert the catheter into the urethral meatus ✋ 
5. Advance catheter slowly until inserted fully, removing the packaging as you do so to ensure it remains sterile 
6. As you reach the bladder, urine will begin to drain into the catheter 
7. Tell patient to tell you immediately if they experience pain, and stop if so 
8. Inflate the catheter balloon, using the 10ml sterile water syringe 💧
9. Remove syringe when balloon is fully inflated 
10. Withdraw catheter gently to identify resistance which confirms that the catheter is secure ✅ 
11. Attach the catheter bag to the catheter and position it below the patient to enable effective urine drainage 
12. Clean any lubricant or urine that spills 💧
13. Recover patient with sheet 
14. Appropriately dispose of waste/equipment 🗑
15. Leave the room to allow the patient to change 

Completion 

1. Tell the patient the procedure is complete ✅ 
2. Thank patient 
3. Inform the patient when and where to seek subsequent medical care if required 
4. Remove and appropriately dispose of PPE 
5. Ensure the patient’s urine output is being monitored by nursing staff 
6. Document details of the procedure in patient’s notes ✍ 

Summary:

1. Greet the patient and describe the procedure
2. Prepare by collecting equipment and don PPE
3. Clean the genital region
4. Anaesthetise the genital region
5. Insert Cather, inflate catheter balloon, remove syringe and then attach catheter bag
6. Complete the procedure by cleaning the region and thanking the patient